SMCWBR14S-N3
Barricade N 300Mbps 11n Wireless 4-port Broadband Router
El router de banda ancha Barricade N (SMCWBR14S-N3) es una soluciσn integral de red que permite utilizar y compartir su conexiσn a Internet de alta velocidad de cable o xDSL. Este router de banda ancha multifuncional combina un switch de 4 puertos LAN 10/100Mbps, un punto de acceso Wireless-N (802.11n) de alta velocidad, un cortafuegos de NAT con SPI y una sencilla interfaz de gestiσn basada en web en un ϊnico y prαctico dispositivo.
TECH SPECS - SMCWBR14S-N3
PHYSICAL:
One 10/100Mbps WAN port
4-port 10/100Mbps LAN switch
Two External Fixed 2dBi antennas
WPS button
Reset button
LED INDICATORS:
Power
LAN (Ethernet Link/Activity)
WAN (Ethernet Link/Activity)
WLAN (Wireless Link/ Activity)
WPS (WPS in progress)
MANAGEMENT FEATURES:
EZ Installation Wizard
Web based management interface (HTTP)
Remote Management
SNTP time synchronize
UPnP
Web-upgrade
SECURITY FEATURES:
NAT Firewall with SPI
Intrusion Detection
Access Control
MAC, IP and Port filter
Content, URL and Keyword Blocking
DMZ Host
SSID Broadcast disable
Wireless MAC address filtering
WEP 64-/128-Bit Encryption
WPA-/WPA2-PSK (Pre-shared Key, TKIP, AES)
WPA/WPA2 Enterprise mode (802.1x)
WiFi Protected Setup (WPS, PBC and PIN methods)
ROUTER FEATURES:
Share your high speed cable/xDSL internet connection
4-port 10/100 LAN switch with auto MDI-MDIX
Built-in 300Mbps Wireless Access Point
Static Route
Dynamic routing supporting RIP v1/v2
NAT with ALGs, NAPT
Wireless Distribution System (WDS)
802.11e WiFi Multimedia (WMM)
IGMP Proxy
Dual SSIDs
Dynamic DNS
DNS Proxy
Virtual Server
DHCP Server
STANDARDS:
Wired
IEEE 802.3 (10Base-T)
IEEE 802.3u (100Base-TX)
Wireless
IEEE 802.11b
IEEE 802.11g
IEEE 802.11n
OPERATING FREQUENCY:
FCC: 2412~2462MHz (Ch1~Ch11)
ETSI: 2412~2472MHz (Ch1~Ch13)
Japan: 2412~2484MHz (Ch1~Ch14)
TX Output Power:(Typical)
802.11n: 17 +/- 1 dBm
802.11g: 17+/- 1 dBm
802.11b: 20 +/- 1 dBm
TEMPERATURE:
Operating: 0oC to 40oC (32oF to 104oF)
Storage: -20oC to 60oC (-4oF to 140oF)
HUMIDITY:
Operating: 10% to 85% Non-Condensing
Storage: 5% to 90% Non-Condensing
DIMENSIONS:
185 x 138 x 35mm (LxWxH)
7.3 x 5 x 1.3in (LxWxH)
WEIGHT:
255g
9oz
POWER REQUIREMENTS:
Input: 110 or 240 VAC, 50-60 Hz
Output: 5V/ 2A
SYSTEM REQUIREMENTS:
Broadband (Cable/xDSL) Internet service and Modem with
Ethernet connection.
2.4GHz 802.11n wireless adapter or 2.4GHz 802.11b/g Wireless
adapter installed on each PC. Alternatively an Ethernet adapter may
be used.
Internet Explorer 5.5 or above, Mozilla Firefox 1.0 or above
We recommend using this product with SMCWUSB-N2 wireless adapter
PACKAGE CONTENTS:
SMCWBR14S-N3
5V, 2A power adapter
RJ45 cable
QIG
EZ Installation & Documentation CD
Warranty information card
